manualshive.com logo in svg

Jonsered FR 2113 MA 4X4, Руководство оператора

Поделиться
Скачать
Jonsered FR 2113 MA 4X4 Скачать руководство пользователя страница 26

24

– English

8009-267

6008-009

6008-010

MAINTENANCE

3. If necessary, the wires can be adjusted by

tightening the adjuster nuts on each side of the
steering collar. Do not tension the wires too
much, they should only be 

tightened

 against the

steering collar.

Support the wire so it does not twist.

If you only tension one side the steering wheel’s
centre position may change.

Check the wire tension as set out in point 2
after you have made the adjustment.

Checking and adjusting the steering
wires

The steering is governed by means of wires.

After a period of use these can become stretched,
which means the steering setting may have
changed.

The steering is checked and adjusted as follows:

1. Dismantle the frame plate by removing the bolts

(two on each side).

2. Check the tension of the steering wires by

squeezing them together by the arrows as
illustrated.
It should be possible to squeeze the wires so
that the distance between them is half the size,
without using too much force.

Содержание FR 2113 MA 4X4

























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды