Jonsered FR 2113 MA 4X4 страница 29 Скачать руководство пользователя | Manualshive

Страница: 29 / 56

background image

English –

27

Replacing the air filter

If the engine seems to lack power or goes irregu-
larly the reason may be that the air filter is clogged.

It is therefore important to replace the air filter at
regular intervals (see ”Maintenance schedule” for
correct service interval).

1. Fold open the engine cover.

2. Pull up the handle on the air filter cover, unhook

and turn towards the engine.

3. Remove the air filter cover.

4. Lift out the air filter cartridge from the fan

housing.

Replace the paper filter if it is clogged with dirt.

MAINTENANCE

IMPORTANT INFORMATION

Do not use compressed air to clean the
paper filter.

Filters should not be oiled. They should be
assembled dry.

5. Carefully lift the precleaner out of the fan

housing. Carefully clean the fan housing so that
dirt does not fall down into the carburetor.

6. Insert a new precleaner and air filter cartridge

in the fan housing.

7. Align the tabs on the cover with the slits in the

housing and replace the air filter cover.

8. Pull the handle outwards. Secure the handle in

the air filter cover and close the cover by
pressing it inwards.

8009-406

8009-409

8009-408

8009-407

8009-410

«
...
27
28
29
30
31
...
»

Содержание FR 2113 MA 4X4

























































Отзывы:

Нет отзывов

Похожие инструкции для FR 2113 MA 4X4

EC Hydro Midsize

Бренд: Ransomes Страницы: 150

MT, MTL, MTEFI, MTLEFI

Бренд: Walker Страницы: 256

Бренд: Walker Страницы: 96

Бренд: Bestgreen Страницы: 88

Бренд: Snapper Страницы: 44

532 43 41-99 Rev. 1

Бренд: McCulloch Страницы: 72

Бренд: Skil Страницы: 104

Бренд: Gardenline Страницы: 36

Greens King IV 62287

Бренд: Jacobsen Страницы: 138

Бренд: Poulan Pro Страницы: 4

Бренд: Yardworks Страницы: 27

135 B TITAN DOD

Бренд: Stiga Страницы: 100

Бренд: Toro Страницы: 44

Бренд: Royal Страницы: 52

Бренд: Craftsman Страницы: 31

Бренд: Craftsman Страницы: 20

Бренд: Craftsman Страницы: 20

3one 917.252580

Бренд: Craftsman Страницы: 28

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды