Jonsered FR 2113 MA 4X4 страница 9 Скачать руководство пользователя | Manualshive

Страница: 9 / 56

background image

English –

7

8010-054

6003-004

Be especially careful when driving on slopes.

Mow upwards and downwards on slopes, not sideways.

Driving on slopes

Driving on slopes is one of the operations where
the risk of the driver losing control of the machine or
of it overturning is the greatest; this can result in
serious injury or death. All slopes demand extra
care. If you cannot reverse up a slope or if you feel
unsure, do not mow it.

Proceed as follows:

•

Remove obstacles such as stones, branches,
etc.

•

Mow upwards and downwards, not sideways.

•

Do not use the machine on ground that slopes
more than 15°.

•

Avoid starting or stopping on a slope. If the tyres
start to slip, stop the blades and drive slowly
down the slope.

•

Always drive smoothly and slowly on slopes.

•

Do not make any sudden changes in speed or
direction.

•

Avoid unnecessary turns on slopes, if
necessary, turn slowly and gradually downwards
if possible.

•

Watch out for and avoid driving over furrows,
holes and bumps. It is easier for the machine to
overturn on uneven ground. Tall grass can hide
obstacles.

•

Drive slowly. Use small movements of the
steering wheel. Select a low gear, so you do not
need to stop to change gear. Engine braking on
the machine is also better in a low gear.

•

Take extra care if any attachments are fitted that
can change the stability of the machine.

•

Do not mow too close to edges, ditches or
banks. The machine can suddenly overturn if
one wheel comes over the edge of a steep slope
or a ditch, or if an edge gives way.

•

Do not mow wet grass. It is slippery, and tyres
can lose their grip so that the machine skids.

•

Do not try to stabilize the machine by putting
your foot on the ground.

•

When cleaning the chassis the machine must
never be driven close to an edge or ditch.

•

Follow the manufacturer’s recommendations
regarding wheel weights or counterbalance
weights to increase stability.

SAFETY INSTRUCTIONS

«
...
7
8
9
10
11
...
»

Содержание FR 2113 MA 4X4

























































Отзывы:

Нет отзывов

Похожие инструкции для FR 2113 MA 4X4

Бренд: LawnMaster Страницы: 40

Бренд: Ryobi Страницы: 20

Бренд: Country Clipper Страницы: 28

Бренд: Land Pride Страницы: 58

Бренд: Makita Страницы: 24

Бренд: Makita Страницы: 140

Бренд: VITO GARDEN Страницы: 37

Бренд: Craftsman Страницы: 36

Бренд: Task Force Страницы: 10

Бренд: Worx Страницы: 10

LANDROID WG757E

Бренд: Worx Страницы: 21

LANDROID L WG792E

Бренд: Worx Страницы: 20

STANDER X 79490219

Бренд: WRIGHT Страницы: 24

WRANGLER SR-125

Бренд: Country Clipper Страницы: 22

Бренд: Country Clipper Страницы: 34

Бренд: Craftsman Страницы: 24

Бренд: Craftsman Страницы: 24

Бренд: Craftsman Страницы: 24

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды