Jonsered FR 2113 MA 4X4, Руководство оператора

Страница: 50 / 56

48
– English
Delivery service
1. Fill the battery with battery acid and charge for four hours.
2. Fit the steering wheel, towing eye and where applicable other
components.
3. Adjust the mowing deck:
Adjust the lifting springs (the weight of the mowing deck should
be 12-15 kg/26.5-33 lbs). Only applies to the Mulching unit.
Adjust the mowing deck so its rear edge is about 2-4 mm (1/8")
higher than its front edge.
Adjust the mowing deck’s cutting height setting so that the
cutting height limit is 5 mm (3/16") above the deck frame at the
lowest cutting height.
4. Check that the right amount of oil is in the engine.
5. Check that the right amount of oil is in the transmission
(not FR 2111, FR 2111 M).
6. Check and adjust the air pressure in the tyres (60 kPa/0.6 bar/8.5 PSI).
7. Connect the battery.
8. Fill the fuel tank and start the engine.
9. Check that the machine does not move in neutral (not FR 2111,
FR 2111 M).
10. Check:
Driving forwards.
Reversing.
Actuating the blades.
Safety switch for the seat.
Safety switch for the lifting lever.
Safety switch for the hydrostat pedals/neutral position.
11. Check that engine revs max. 2950 rpm.
12.Check the screws on the silencer (10Nm)
13. Inform the customer about:
The need and benefit of following the service schedule.
The need and benefit of leaving the machine for
regular service.
The effects of maintenance on the machine’s second hand
value.
Application areas for Mulching.
14. Fill in the sales certificate, etc.
Delivery service has been
carried out.
No remaining notes.
Certified:
After the first 5 hours
1. Change engine oil.
Action
Date, stamp, signature
SERVICE SCHEDULE
Date, stamp, signature