manualshive.com logo in svg

Jonsered FR 2113 MA 4X4, Руководство оператора

Поделиться
Скачать
Jonsered FR 2113 MA 4X4 Скачать руководство пользователя страница 10

8

– English

8010-057

8010-058

Children

•

Serious accidents may occur if you fail to be on
your guard for children in the vicinity of the
machine. Children are often attracted to the
machine and mowing. Never assume that
children will remain where you last saw them.

•

Keep children away from the area to be mowed
and under close supervision by another adult.

•

Keep an eye out and shut off the machine if
children enter the work area.

•

Before and during reversing procedures, look
behind you and down for small children.

•

Never allow children to ride along. They can fall
off and seriously injure themselves or be in the
way for safe manoeuvring of the machine.

•

Never allow children to operate the machine.

•

Be particularly careful near corners, bushes,
trees or other objects that block your view.

SAFETY INSTRUCTIONS

Never allow children to operate the machine.

Never fill the fuel tank indoors.

Maintenance

•

Stop the engine. Prevent starting by removing
the ignition cable from the spark plug or remove
the ignition key before making any adjustments
or carrying out maintenance.

•

Never fill the fuel tank indoors.

•

Petrol and petrol fumes are poisonous and
extremely flammable. Be especially careful
when handling petrol, as carelessness can
result in personal injury or fire.

•

Only store fuel in containers approved for the
purpose.

•

Never remove the fuel cap and fill the petrol
tank while the engine is running.

•

Allow the engine to cool before refuelling. Do
not smoke. Do not fill petrol in the vicinity of
sparks or naked flames.

•

Observe the risk of environmental damage
when handling oil, fuel and the battery. Remem-
ber to follow local regulations concerning waste
handling.

•

Electric shocks can result in injury. Do not touch
the ignition lead when the engine is running. Do
not test the ignition system with your fingers.

Содержание FR 2113 MA 4X4

























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды