background image

769-09684 

1.21.14

Printed In USA

I

nstallatIon

 M

anual

30-inch Mulch Kit — 19A30013OEM

Installing the Mulch Plug

1.  Install the mulch plug into the deck discharge opening on 

the deck. The studs on the deck surface will fit through the 

holes on the upper portion of the  mulch plug. The small 

tab on the deck lip area will fit through the square cutout 

on the lower portion of the  mulch plug. See Figure 1-2.
Note: Make certain that the upper-rear portion of mulch 

plug is depressing the safety switch located on the deck 

surface. The engine 

will not start 

without the mulch plug 

properly in place.

Figure 1-2

2. 

Secure the mulch plug by tightening the wing knobs 

removed earlier.

Model 19A30013OEM mulch kit is designed for use with select 

30-inch single-blade cutting decks. Refer to your riding mower’s 

Operator’s Manual to assure compatibility. 

Carton Contents

Before beginning installation, remove all parts from the carton 

to make sure everything is present. Carton contents are listed 

below. Part numbers are shown in parentheses.
• 

One 30” Deck Mulch Plug (731-09312)

Removing the Discharge Chute

1. 

Remove the wing knobs that secure the discharge chute in 

place. See Figure 1-1.

2. 

Remove the discharge chute from the deck discharge 

opening by lifting it off the deck. 

Figure 1-1

 

P. O. Box 1386, 97 Kent Avenue, KITCHENER, ONTARIO, CANADA N2G 4J1

Отзывы: