Jonix 70JONIXUPIN, Руководство по эксплуатации и обслуживанию

Страница: 46 / 60

46
JO NIX
up in
ON
61
ON
62
RESET
( 5 sec. )
63
64
Fig. 64: Replace the external cover by
fixing it to the pins.
Fig. 61: Act on the safety thermomagnetic
circuit upstream of the device to restore the
power supply.
Fig. 63: Keep the reset button pressed for
at least 5 seconds until the alarm led (red
led) goes out.
Fig. 62: Set the switch to ON to check for
voltage in the device. Check the operation of
the device, a slight sizzle from the ionizing
tube must be audible and you will hear the
air flow generated by the fan.
ATTENTION: The perforated
ambient air inlet grid must be
positioned at the filter.