Jonix 70JONIXUPIN, Руководство по эксплуатации и обслуживанию

Страница: 39 / 60

39
JO NIX
up in
37
ON
38
ON
39
RESET
( 5 sec. )
40
Fig. 38: Act on the safety thermomagnetic
circuit upstream of the device to restore the
power supply.
Fig. 37: Remount the locking plate by
screwing in the fixing screws.
Fig. 40: Keep the reset button pressed for
at least 5 seconds until the alarm led (red
led) goes out.
Fig. 39: Set the switch to ON to check for
voltage in the device. Check the operation of
the device, a slight sizzle from the ionizing
tube must be audible and you will hear the
air flow generated by the fan.