Jonix 70JONIXUPIN, Руководство по эксплуатации и обслуживанию

Страница: 25 / 60

25
JO NIX
up in
7 -
SPECIFIC APPLICATION FOR LIFTS AND LIFTING EQUIPMENT
Due to the peculiarity of this environment and the specific safety regulations to which lifts are
subject, further instructions are given below for the installation, use and maintenance of
JO NI X
up in
in lifting systems.
The installation of JO NIX
up in
lifting systems must comply with the specific regulations in force
in the country of installation and must not interfere with the safety components of the lift and
lifting systems. In particular, for Italy, Directive 2014/33/EU for the harmonization of the laws of
the Member States relating to lifts and safety components for lifts and DPR 162/99 as amended
and supplemented must be respected.
The installation and maintenance of the device
JONIX up
in
must be carried out by a qualified
and specialized lift maintainer according to the regulations in force in the country of installation.
In particular, for Italy, Presidential Decree 23/2017 provides that the owner of a lift system or his
legal representative must entrust the maintenance of the entire lift system to
a person with a certificate of competency or a specialised firm or a Community operator with an
equivalent specialisation who must provide for the maintenance of the installation and its normal
operation by means of authorised personnel. The owner of a lift system or his legal representative
must have the lift system
JO NIX
up
indoors installed and maintained by the maintainer or by
the specialized company to which the whole lift system is entrusted, or by another specialized
company in agreement with the owner of the existing contract.
The
JO NIX
up in
device has been specifically designed to be placed inside elevators and does
not create any kind of problem for the health of animals and people, including the elderly, children
and pregnant women.
6.8 FIRST START CHECKS
At first start-up, the units should be subjected to at least the following checks:
- check the integrity and stability of the
JO NIX
up in device
as a whole;
- check that all panels and covers are closed and securely fastened;
- check that the mains voltage is correct in relation to what is indicated on the nameplate of the
device;
- check that the alarm led is off (red led);
- check that the power supply led is on (yellow led);
- check that the air flow is regular;
- check that you can hear the slight sizzle of the ionizing tube.
For further information regarding the operating principle of non-thermal plasma
generators, please contact the Manufacturer directly and consult the website
www.jonixair.com.
Repeat the checks carried out at the first start-up even after each extended
shutdown period and after maintenance.