Single Mode
Menu-Driven Features
3-11
068
1.
(Soft-Button) < VCO >
After pressing this soft button, the VCO’s of all voices are tuned in all octaves. The display
shows how the tuning progresses. After tuning everything succesfully, the LC-Display goes
back to the top level info page.
2.
(Soft-Button) < Filter >
After pressing this button, the VCF’s of all voices are tuned.
3.
(Soft-Button) < Env >
(Envelopes)
When pressing this button, the envelopes are calibrated and the parameter times are
adapted so they correspond exactly.
4.
(Soft-Controller) < Master >
(Mastertune)
The soft controller serves as mastertune knob here. The tuning of all 32 oscillators (VCO’s
and RCO’s) can be changed in steps of _ semitones over a range of +/- 2 semitones.
Arpeggiator Menu
The arpeggiator divides chords that were played on the keyboard into ascending or
descending sequences. When the amount of played keys is higher than 8, the first played note
will be replaced by the last one.
After pressing the
(Soft-Button) <Arpgi >
in the top menu level, you get to the arpeggiator
menu.
The LC-Display shows:
The soft controller/buttons now have the following functions:
1.
(Soft-Controller) < Arpgi >
This is used to switch the arpeggiator on and off:
< off / on >
.
2.
(Soft-Controller) < Octve >
You can set the arpeggio range between 1 and 5 octaves:
< 001 >
to
< 005 >
3.
(Soft-Controller) < Latch >
< on >
The arpeggio will continue to play after releasing the keys. Keys that are pressed
consecutively are inserted into the arpeggio. When more than 8 notes are played, the first
played note is replaced by the last played one. (Last-note priority).
< off >
The arpeggio only plays as long as you hold the keys.
4.
(Soft-Controller) < Speed >
you can set the tempo of the arpeggio between
< 001 >
and
< 127 >
.
The arpeggiator menu contains two pages (as the arrows in the LC display indicate). You can
see the second half of the arpeggiator menu by pressing the
(Page)
-button.
thebook-all 07.11.2002 18:28 Uhr Seite 68 (Schwarz Bogen)
