Jolimark TP830 Series, Руководство пользователя

Страница: 58 / 65

TP830 User's Manual
- 53 -
FS W Turn quadruple-size mode on/off for Chinese character
Format: ASCII: FS W n
Decimal: 28 87 n
Hex: 1C 57 n
Description:
0
≤ n ≤ 255
When the last bit of n is 0, turn off the quadruple-size mode.
When the last bit of n is 1, turn on the quadruple-size mode.
FS p n m Print NV bit image
Format: ASCII: FS p n m
Decimal: 28 112 n m
Hex: 1C 70 n m
Description:
1
≤ n ≤ 64 m=0, 1, 2, 3, 48, 49, 50, 51 Prints the NV bit image n using the mode specified by m.
m= 0, 48 Normal mode; m=1, 49 Double width mode;
m= 2, 50 Double height mode; m=3, 51 Quadruple mode.
FS q n Define the NV bit image
Format: ASCII: FS q n [xL xH yL yH d1 d2 …dk] 1… [xL xH yL yH d1 d2 …dk
Decimal: 28 113 n [xL xH yL yH d1 d2 …dk] 1… [xL xH yL yH d1 d2 …dk]
Hex: 1C 70 n [xL xH yL yH d1 d2 …dk] 1… [xL xH yL yH d1 d2 …dk]
Description:
1
≤ n ≤ 64; xH=0; 0 ≤ xL ≤ 72; yH=0; 0 ≤ yL ≤ 30
k= (xL+xH*256)*(yL+yH*256)*8
The command can define 64 bit images at the same time. All NV images preciously defined are canceled
when new bit image defined. When this command processing, ERROR LED will be on for a period of time,
then the PAPER OUT LED and ERROR LED will be both on and the printer resets. No other data or
commands follow this command, or it may cause data lost or printing mess. The NV image data will be
stored in the printer even which is powered off, and will not lose till this command reprocessed. Excessive
use of this function may cause the NV memory damaged. As a guideline, the command should not be
processed more than 10 times per day. The whole command including the bit image data should be less
than 128K bytes (1M bits).
xL,xL specifies bytes in the horizontal direction for the NV bit image you defined and the limited width is 72
bytes and 576 dots.
yL,yH specifies bytes in the vertical direction for the NV bit image you defined with the height of 30 bytes
and 240 dots..
d specifies the definition data for the NV bit image(column format).
GS BEL n1 n2
Beep for appointment
Format: ASCII: GS BEL n1 n2 n3
Decimal: 29 7 n1 n2 n3
Hex: 1D 07 n1 n2 n3
Description:
N1 specifies the beeping times, n2 specifies the length of beeping time and n3 specifies the length of
intermission time. The unit of n1, n2 is 0.1 second.