TP830 User's Manual
- 33 -
3.3 Hex Dump Printing
This function allows you to check whether the connection between the printer and the computer or the
terminal device works properly or not. The method is that hold on pressing the
FEED
button while
turns on the printer, the
ERROR
LED blinks twice with two beeps, then loosen the button. Turn off the
printer and restart it to exit this print mode.
3.4 Restoring Factory Default Setting
The function is to clear the settings stored in the printer and to restore the factory default settings for
correlative parameters.
The method is that hold on pressing the
FEED
button while turns on the printer, the
ERROR
LED
blinks five times with five beeps, then loosen the button, at this time, the function takes effect and turn
off the printer.
3.5 Online-aptitude Parameter Settings
TP830 supports the function of parameter settings, which can be set in the PC with the driver installed
in.
The concrete setting steps are shown as follows:
1. Make sure that the computer and the printer are connected with the USB cable and both the
computer and the printer are turned on, the printer should be in normal working condition as well.
2. Under the operating system of WIN 2000/WIN XP/VISTA/WIN 7, click “Start”
→
“Settings”
→
“Printers”, and open the window of “Printers”.
Under the operating system of Windows 8, click “Desktop” in the main panel firstly, and then double
click “Control panel” after entering the window of “Desktop”, click “Hardware and Sound” to find
“Devices and printers”, at last, open the window of “Devices and printers”.
3. Right click “TP830” in the window of “Printers”, and then select “Properties”.
4. Click “Printer settings” in the “Properties” page and open the window of “Printer settings”.
Содержание TP830 Series
Страница 1: ...User s Manual TP830 Series Thermal Receipt Printer ...
Страница 23: ...TP830 User s Manual 18 Figure 5 Double click Local Area Connection 2 SSID ...
Страница 36: ...TP830 User s Manual 31 ...
Страница 65: ......