Jolimark TP830 Series, Руководство пользователя

Страница: 57 / 65

TP830 User's Manual
- 52 -
On 04 4 Double-width is selected
3 Off 00 0 Double-height is not selected
On 08 8 Double-height is selected
4 - - - Not defined
5 - - - Not defined
6 - - - Not defined
7 Off 00 0 Underline is not selected
On 80 128 Underline is selected
FS & Set Chinese mode
Format: ASCI: FS &
Decimal: 28 38
Hex: 1C 26
Description:
Enter the Chinese mode.
FS - Turn Chinese character underlined mode on /off
Format: ASCII: FS - n
Decimal: 28 45 n
Hex: 1C 2D n
Description:
n=0, 48 turn off the Chinese character underline mode.
n=1, 49 turn one dot the thick underline of Chinese character mode on.
n=2, 50 turn two dots the thick underline of Chinese character mode on.
Underline mode is ignored if 90°clockwise rotation is turned on at the same time.
FS . Cancel Chinese mode
Format: ASCII: FS .
Decimal: 28 46
Hex: 1C 2E
Description:
In this mode No Chinese character is printed.
FS 2 User-defined Chinese characters
Format: ASCII: FS 2 c1 c2 d1……d72
Decimal: 28 50 c1 c2 d1……d72
Hex: 1C 32 c1 c2 d1……d72
Description:
c1=fe; a1
≤ c2 ≤ fe; 0 ≤ d ≤ 255; c1 specified the first byte of the character code, c2 specified the second byte of
the character code. Data dk defined from up to down 3 bytes one column and from left to right 24 columns.
FS S Set Chinese character space
Format: ASCII: FS S n1 n2
Decimal: 28 83 n1 n2
Hex: 1C 53 n1 n2
Description:
0
≤ n1 ≤ 255, 0 ≤ n2 ≤ 255 Set the character left-side space to n1* horizontal motion unit, right-side space to n2*
horizontal motion unit.