Jolimark TP830 Series Скачать руководство пользователя | Manualshive

Страница: 19 / 65

background image

TP830 User's Manual

- 14 -

Check the “Use DHCP” if needed to assign dynamic address, the settings above will be disabled
automatically. Please make sure there is a DHCP server in the network, or the printer can not
receive an effective IP address.

When to specify static address, uncheck “Use DHCP” and fill in “IP address”, “Subnet Mask” and
“Default Gateway”. If there is no gateway in the network, fill 255.255.255.255 in the “Default
gateway”. “IP address” and “Subnet Mask” should obey the assigning rules of local LAN (Ethernet),
please enquire the administrator of networks which the printer connects to for more details.

Click “OK” to send address setting information to the specified printer. Click “Cancel” if you abandon
the modification.

Click “Search” in the main interface again to update printer information after modifying the printer’s
IP address.

3) Record printer’s IP address

Record the printer’s IP address, which will be used in the section “Newly-install printer network
driver” or “Upgrade-install printer network driver (setting driver’s network port)”.

2.8 Wi-Fi Setting

Please use Jolimark network setting software WiFiConfig to set the IP address for Jolimark Wi-Fi
interface network printers. Software WiFiConfig (WiFiConfig. exe) can be found in the CD or
downloaded from

2.8.1 Connecting the Printer, Using WiFiConfig Software

Connect the printer and computer with the USB cable and turn on the power both of them. Make sure
the printer is in the operating state; double click WiFiConfig.exe in the WiFiConfig software of the CD list.
The figure of the software is shown as follows:

Caution: The network printing function needs the operation systems of Windows2000 and

above, the operation systems of Windows98/ME and below are not supported.

«
...
17
18
19
20
21
...
»

Содержание TP830 Series


































































Отзывы:

Нет отзывов

Похожие инструкции для TP830 Series

464de - X B/W Laser

Бренд: Lexmark Страницы: 27

DocuPrint C2535 A

Бренд: Xerox Страницы: 120

Бренд: Agilent Technologies Страницы: 2

Бренд: Oce Страницы: 32

4510B - Phaser B/W Laser Printer

Бренд: Xerox Страницы: 10

PRICOM PRICOM C- 5100

Бренд: Silex technology Страницы: 7

Бренд: Epson Страницы: 68

Бренд: Epson Страницы: 4

Бренд: Epson Страницы: 1

Бренд: Epson Страницы: 1

Бренд: Epson Страницы: 87

Бренд: Epson Страницы: 108

Бренд: Epson Страницы: 89

Бренд: Epson Страницы: 151

Бренд: Epson Страницы: 2

Бренд: CraftUnique Страницы: 4

Бренд: HP Страницы: 8

Бренд: Garros Страницы: 99

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды