TP830 User's Manual
- 16 -
3. Click “Load”, the computer will load the information of the printer and display it on the WiFiConfig
software. Click “OK” in the dialogue box “Loading is complete” that pops up. (As figure 3 shown)
4. The loaded information is just the setting information of the currently connected printer. For normal use,
you need to reset the parameters according to the wireless networks you are using.
The detailed settings and description are as follows:
The WLAN type can be divided into three types: Infrastructure, Ad Hoc and Off. (As figure 4 shown)
Infrastructure
: Select infra. This is the common WLAN type which connects the networks through
hotspot or router.
Ad Hoc
: Select ad-hoc which ueses printer as the hotspot and communicates with the printer directly
through wireless network card.
Off
: Shut down the Wi-Fi interface of the printer. Printer will not print in the Wi-Fi mode after selecting
this item.
SSID
When “WLAN type” is selected to “Ad Hoc”, use the loaded SSID directly (Default setting is WIFI).
When “WLAN type” is selected to “Infrastructure”, network name should be the same with the name of
hotspot or router.
Figure 3
Figure 4
Note: Please make sure the wireless network card has been connected to the related router
or hotspot before the following operation.
Содержание TP830 Series
Страница 1: ...User s Manual TP830 Series Thermal Receipt Printer ...
Страница 23: ...TP830 User s Manual 18 Figure 5 Double click Local Area Connection 2 SSID ...
Страница 36: ...TP830 User s Manual 31 ...
Страница 65: ......