Jolimark TP830 Series, Руководство пользователя

Страница: 12 / 65

TP830 User's Manual
- 7 -
The installing steps of parallel interface for Windows 2000/XP/Vista are as follows:
1 Click “Start” → “Settings” → “Select Printers”.
2. Click “Add Printer”, then a window of “Add Printer Wizard” pops up, click “Next”, then please read the
select guide carefully, such as, select “Local printer” in the “Local or Network Printer” window, then
click “Next”.
3. A window of “Select a Printer Port” pops up, select “LPT1: (Recommended Printer Port)”, (If you
need to use other ports, please select the respective port), click “Next”.
4. A window of “Install Printer Software" pops up, click “Have Disk...”, click “Next”.
5. A window of “Install From Disk” pops up. Please according to the operating system environment, you
should select the path as follow: CD-ROM → “Drivers” → “WIN2000 (XP-Vista-Win7)”, click “Open”,
then click “OK” to return to the window of “Install Printer Software”, click “Next”.
6. Follow the guide click “Next” gradually till the installation is finished.
The installing steps of parallel interface for Windows 7 are as follows:
1. Click “Start” → “Device and Printers”.
2. Click “Add Printer”, then it pops up a window of “Add Printer Wizard”, select “Local printer” in the
“Local or Network Printer” window, then click “Next”.
3. A window of “Select a Printer Port” pops up, select “LPT1: (Recommended Printer Port)”, (If you
need to use other ports, please select the respective port), click “Next”.
4. A window of “Install Printer Software” pops up, click “Have Disk...”, click “Next”.
5. A window of “Install From Disk” pops up. Please select the path as follow: CD-ROM → “Drivers” →
“WIN2000 (XP-Vista-Win7)”, click “Open”, then click “OK” to return to the window of “Install Printer
Software”, click “Next”.
6. Follow the guide click “Next” gradually till the installation is finished.
The USB interface installing steps for Windows 2000/XP/Vista/Win7 are as follows:
The following steps are used Windows XP as an example. There are slight differences among different
operating systems.
1. Connect the printer to computer with the USB cable and turn on both of them. “New found” will
display on the monitor, then the window of “Found New Hardware” pops up—“Welcome to the new
hardware wizard”.
2. Select “Install from a list or specific location”, click “Next”.
3. A window of “Please choose your search and installation options” pops up, choose “Don't search, I
will choose the driver to install (D)”, click “Next”.
4. A window of “Add Printer Wizard” pops up, click “Have Disk”.
5. A window of “Install From Disk” pops up. Please according to the operating system environment,
you should select the path as follow: CD-ROM → “Drivers” → “WIN2000 (XP-Vista-Win7)”, click
“Open”, then click “OK” to return to the window of “Add Printer Wizard", click “Next”.
6. Follow the guide click “Next” gradually till the installation is finished.
Please setup the driver following the setup description in the CD going along with the printer. What’s
more, you can use the TM-T88II, TM-T88III serials driver from EPSON.
If you want to cut the paper after printing, please select the “Full cut” or “Partial cut” in the
Paper/Quality page after clicking the “Printing Preferences” button which lies in the “General” page of
the driver properties. Referring figure is shown below.
Note: If paper cut effect is the same whichever you select “full cut” or “partial cut” in the
driver properties, this means the cutter (the printer equipped with) can only carry out
one cut-method (full cut or partial cut).