Jolimark TP830 Series, Руководство пользователя

Страница: 51 / 65

TP830 User's Manual
- 46 -
command is still valid even in error or off-line status.
n=1: Transmit print status
n=2: Transmit off-line status
n=3: Transmit error status
n=4: Transmit paper sensor status
ESC BEL n1 n2 Beep for appointment
Format: ASCII: ESC BEL n1 n2 n3
Decimal: 27 7 n1 n2 n3
Hex: 1B 07 n1 n2 n3
Description:
N1 specifies the length of beeping time, n2 specifies the length of intermission time and n3 is the beeping
times. The unit of n1 and n2 is 100 milliseconds.
ESC SP Set right-side character space
Format: ASCII: ESC SP n
Decimal: 27 32 n
Hex: 1B 20 n
Description:
Set the right-side space of the character to n*(horizontal or vertical minimal unit) n=0~255.
Horizontal or vertical minimal unit is specified by GS P command.
ESC
！
Set character print mode
Format: ASCII: ESC
！
n
Decimal: 27 33 n
Hex: 1B 21 n
Description:
Select the print mode using n as follows. n=0~255
Bit Value Function
0 Character A
0
1 Character B
1
，
2 -- -- -- Not defined
0 Emphasize mode not selected
3
1 Emphasize mode selected
0 Double-height not selected
4
1 Double-height selected
0 Double-width not selected
5
1 Double-width selected
6 -- -- -- Not defined
0 Underline mode not selected
7
1 Underline mode selected
ESC $ Set absolute print position
Format: ASCII: ESC $ nL nH
Decimal: 27 36 nL nH
Hex: 1B 24 nL nH
Description:
Set the distance from the beginning of the line to the position at which subsequent characters are to be
printed. The distance is (nL+nH*256)* (horizontal or vertical minimal unit). nL, nH=0~255.