joke 4065735316068, Руководство по эксплуатации

Страница: 12 / 30

12 12
USB
START
FOO
T
MEM
PAR 1
PAR 2
ESC
1.
2.
3.
Fig. 10
Connecting the ground cable
Attention!
During coating, very high currents fl ow between the electrode and the workpiece. To keep
parasitic inductance as low as possible, lay all cables as parallel as possible and do not coil the
cables.
Attention!
Always insert the welding cable plug into the socket of the control unit so that the socket on the
plug fi ts into the guide of the socket. Then turn the plug to secure it in the socket.
Attention!
If the workpiece is too small to attach the contact magnet to it, clamp the workpiece in a suitable
vice and attach the contact magnet to this.
USB
START
FOOT
MEM
PAR 1
PAR 2
ESC
2.
1.
3.
Fig. 11