joke 4065735316068, Руководство по эксплуатации

Страница: 22 / 30

22 22
Calling up device information
Step 1 Step 2 Step 3 Step 4
2x
ESC
2x
Open main menu Select “G-Info” Displaying version
information and oper-
ating hours Back to the standard
display
= ESC = MENU =
-----------------------------------
- Sprache/Language
- G-Info
- LED
[C]=ESC
= ESC = G-Info =
-----------------------------------
SW-DISPLAY:
HW-DISPLAY:
SW-POWER:
SW-POWER:
[C]=ESC
V____
V____
V____
V____
Setting the signal tone and LEDs
Step 1 Step 2 Step 3 Step 4
2x
ESC
2x
Open main menu Select “ LED” Make your settings Back to the standard
display
= ESC = MENU =
-----------------------------------
- Sprache/Language
- G-Info
- LED
[C]=ESC
= ESC = LED =
-----------------------------------
- LCD-Contrast
- Summer
- LED brightness
- Animation
[C]=ESC
____
____
____
____
• Setting the contrast of
the display
• Switching the signal
tone on/off
• Setting the brightness
of the LED signal
strips
• Demonstrate the LED
strips
Application notes
Punching technology
• Punching slugs / punching burrs / cutting clearance:
Coat the die clearance to the penetration depth of the punch.
• Cold welding of the punch:
Coat the outside of the punch to at least the length of the die penetration depth and regrind or
lap the punch face as needed. The pores of the coating store the lubricating fi lm during
punching, thus preventing cold welding.
• Blunt cut edges:
Coat the faces of the punches and dies. Select the coating thickness according to the die size,
the working pressure and the precision of the die.
15 15 16
17
19 19 18