joke 4065735316068, Руководство по эксплуатации

Страница: 20 / 30

20 20
what dampen the fusion penetration on exposed areas.
If a fi nely lapped surface is to be achieved, you should fi rst apply a relatively thick coat, followed
by a thinner second coat.
Stopping the handpiece
A B
Fig. 23
Switching the unit off
USB
Fig. 24
Polishing the coating (if necessary)
Wet the applied coating with abrasive fi le oil. Then smooth the applied coating with a dia-
mond-tipped tool in rotating movements. Next, clean the coating with a cleaning agent
(JOKE X 73016 ).
To obtain a very fi ne surface, polish the coating further with a wooden stick and a 20 μm diamond
lapping paste. Clean the surface. Then polish the coating further with a wooden stick and a 10 μm
diamond lapping paste. Machine round workpieces as described on a high-speed rotating lathe.