joke 4065735316068, Руководство по эксплуатации

Страница: 9 / 30

99
The function of the signal sounds
2 brief sounds
• After calibration: Device is ready to use
• Settings accepted e.g. after saving
1 long sound
• Device error or faulty operation
Troubleshooting or device restart required
Function of the LED display strip
START
FOOT
MEM
PAR 1
PAR 2
ESC
US
Fig. 4
LED strip Colour Type of display Meaning
Top Blue Pulsing Handpiece is connected
Blue-white Movement towards the
centre Handpiece is switched on and operating
with proper ground contact.
Orange Movement towards the
centre Handpiece is switched on, but has no
ground contact
Red Movement towards the
centre The pressure with which the workpiece
is pressed during operation is too high.
Bottom White LED runs from left to right
summing up during cali-
bration. The pressure with which the workpiece
is pressed during operation is optimal.
Green LED runs from left to right
summing up during cali-
bration. Mechanical zero point detected and
adjusted.
Right Green, yellow,
red Rising from green to red Display of device temperature in control
unit
Top, bottom Red Lights Device error or faulty operation
Red Lights and buttons fl ash
simultaneously Serious device fault or dangerous oper-
ating error, restart required
All White (right,
left), Blue (top,
bottom) Lights Device starting or important information
in display
Colourful Flashing and motion Animation running
7
8