Johnson Controls T606MSN-4 Скачать руководство пользователя страница 15

Страница: 15 / 22

T606MSx-4 and T606MSx-4+PIR Series Multi-Stage Temperature and Humidity Controllers
Installation Instructions

Entering Temporary Temperature Setpoints

The user can temporarily change the temperature
setpoints for the Occupied and Unoccupied heating
and cooling modes. To temporarily change the setpoint,
press the

UP/DOWN

arrow keys to change the

temporary setpoint for the current mode of operation.

Note:

Whether the controller is heating or cooling, the

respective setpoint is temporarily adjusted. To toggle
between the temporary heating and cooling setpoints,
press the

key while changing the temporary

setpoints.

Ending Temporary Temperature Setpoints

The temporary setpoints remain in effect for the
duration set in the

TOccTime

parameter or until

manually released.

Note:

Setting the

TOccTime

parameter to 0.0 hrs

prevents the temporary setpoints from taking effect.

To manually release the temporary setpoint, while in
the Main User Menu:

Press the

key for all prompts until the Temperat

set

prompt appears. If the controller is in the

Occupied state, this is the first prompt.

Press the

YES

key to cancel all temporary

setpoints.

Press the

MENU

key again and press the

YES

key

to exit the Main User Menu.

The setpoint reverts to the Permanent Temperature
Setpoint.

Table 4: Entering Permanent Temperature

Setpoints (Part 1 of 2)

Controller
Display

Description

Press the

MENU

key while in the

Status Display Menu to enter the
Main User Menu.

Press the

key for all prompts until

the temperature setpoint prompt
appears on the display (it may be the
first prompt). Press the

YES

key to

enter the temperature setting menu.

Press the

YES

key to change the

Occupied cooling setpoint. Press the

key to advance to the Occupied

heating setpoint menu.

Press the

UP/DOWN

arrow keys to

set the temperature. Press the

YES

key to store the value and

advance to the next menu.

Press the

YES

key to change the

Occupied heating setpoint. Press the

key to advance to the

Unoccupied cooling setpoint menu.

Press the

UP/DOWN

arrow keys to

set the temperature. Press the

YES

key to store the value and

advance to the next menu.

Press the

YES

key to change the

Unoccupied cooling setpoint. Press
the

key to advance to the

Unoccupied heating setpoint.

Press the

UP/DOWN

arrow keys to

set the temperature. Press the

YES

key to store the value and

advance to the next menu.

Press the

YES

key to change the

Unoccupied heating setpoint. Press
the

key to advance to the

temperature display units.

RoomTemp
75.0

Temperat
set? Y/N

Cooling
set? Y/N

Cooling
75.0

Heating
set? Y/N

Heating
68.0

Unocc CL
set? Y/N

Unocc CL
80.0

Unocc HT
set? Y/N

Press the

UP/DOWN

arrow keys to

set the temperature. Press the

YES

key to store the value and

advance to the next menu.

Press the

YES

key to set the display

units to °F or °C. Press the

key to

advance to the temperature setpoint
type menu.

Press the

YES

key to return to the

Status Display Menu or press the

key to re-enter the temperature

setting menu.

Table 4: Entering Permanent Temperature

Setpoints (Part 2 of 2)

Controller
Display

Description

Unocc HT
62.0

set? Y/N

Exit?
Y/N

Содержание T606MSN-4























Результаты поиска

Содержание T606MSN-4

Отзывы:

Похожие инструкции для T606MSN-4

Бренды по названию

Популярные бренды

Johnson Controls T606MSN-4, Руководство по установке

Результаты поиска

Содержание T606MSN-4

Отзывы:

Похожие инструкции для T606MSN-4

Бренды по названию

Популярные бренды