background image

System 350 A350A/B Electronic Temperature Control Product/Technical Bulletin

    7

2. Check temperature sensor for proper resistance.

a.  Take an accurate, independent temperature

reading at the sensor location.

b.  Disconnect the sensor from the control. Using

an ohmmeter, measure the resistance across
the two sensor leads. Consult Figure 7 to verify
sensor conformance.

°F

Temperature

260

240

220

200

180

160

140

120

100

80

60

40

20

0

-20

-40

500 700 900 1100

Resistance (Ohms)

1300 1500 1700 1900 2100

°C

120

100

80

60

40

20

0

-20

-40

Figure 7: Temperature vs. Resistance

Chart for the A99B Series Sensor

c. If the resistance varies substantially from the

optimal resistance for that temperature, the
sensor or wiring must be replaced.

Note:

The sensor reading indicated by the D350 may
differ from thermometer readings due to sensor
tolerances, time constants, accuracy of
thermometer, and other factors.

3. Check the A350 for proper operation.

Note:

Steps 1 and 2 must be performed first.

a. Adjust the setpoint dial to at least 40°F (22°C)

below the sensor temperature determined in
Step 2.

b. Increase setpoint by slowly turning the dial until

the control relay and LED turn On and Off.

c. If the relay does

 not

 perform as indicated in

Table 4, replace the A350.

Table 4: A350 Relay Troubleshooting

Action

LED

N.O. Contact

Status

Setpoint

Dial Setting*

Heating

On

Closed

(Ts) = Sp - Diff

Heating

Off

Open

(Ts) = Sp

Cooling

On

Closed

(Ts) = Sp + Diff

Cooling

Off

Open

(Ts) = Sp

*(Ts) is sensed temperature, and (Sp) is setpoint

temperature.

R

epairs and Replacement

Do not make field repairs or perform calibration.
Replacement controls and A99B Temperature Sensors
are available through the nearest Johnson Controls
representative. See Tables 5 and 6 for ordering
information.

O

rdering

Table 5: System 350 Products

Item

Product Code
Number

Description

A350 Temperature Controls
(With Temperature Sensors)

A350AA-1C
A350AA-2C
A350AA-3C
A350BA-1C
A350BA-2C

Range: -30 to 130°F; Adjustable Differential: 1 to 30F°
Range: 90 to 250°F; Adjustable Differential: 1 to 30F°
Range: -30 to 130°F; Adjustable Differential: 1 to 30F° (concealed setpoint)
Range: -35 to 55°C; Adjustable Differential: 0.5 to 17C°
Range: 30 to 120°C; Adjustable Differential: 0.5 to 17C°

A350 Controls Without
Sensors

A350AB-5C
A350AB-1C
A350AB-2C
A350BB-1C

Range: 90 to 150°F; Adjustable Differential: 1 to 30F°
Range: -30 to 130°F; Adjustable Differential: 1 to 30F°
Range: 90 to 250°F; Adjustable Differential: 1 to 30F°
Range: -30 to 130°F; Adjustable Differential: 1 to 30F°

Digital Temperature Setpoint
Display Modules

D350AA-1C
D350BA-1C

Fahrenheit Scale
Celsius Scale

On/Off Stage Modules

S350AA-1C
S350AB-1C

Fahrenheit Scale
Celsius Scale

Slave Stage Modules

S350CC-1C

Dual Scale (°F and °C)

Proportional Stage Modules

S350PQ-1C

Dual Scale (°F and °C)

Power Module

Y350R-1C

120/240 VAC, 50/60 Hz Input; Rectified Class 2, 24 VAC Output

Содержание System 350 A350A









Отзывы: