Johnson Controls JWS-3, Инструкция по установке и эксплуатации

Страница: 41 / 54

Administration Tab JWS-3 Operation
41 JWS-3 Installation and Operation Manual - P/N: 53550:Rev: A1 1/12/10
Clicking Auto Detect lists all online nodes on the network as “Mapped” and all offline nodes on
the network as “Unmapped”. When Auto Detect or Change Settings are clicked network data will
be accessed to populate a node’s field, therefore, the display will refresh collapsing the Menu
navigation tree.
If a node is Unmapped, the JWS-3 will not display events from that node. If a new node is
installed; you must auto detect or individually map it before it’s properties or events will be
displayed.
Node Status Values:
• Online - The node was auto detected by the JWS-3, but it will not show up in the Menu at the
left, nor will events be displayed, until it is mapped.
• Offline - There is no device detected at that node address. No events will be reported.
• Mapped - If the node is online, it will show up in the Menu, and events will be displayed in the
browser.
• Unmapped - The default value; the node is either online with no event reporting, or there is no
device detected at that node address. No events or properties will be displayed for unmapped
nodes.
4.7.6 Automatic Point Detection
This option auto detects IFC-1010/IFC-2020 points on an NFN network.
How Points Become Visible To The JWS-3
These are the ways a point becomes visible to the JWS-3:
• With IFC/IFC2-3030, IFC/IFC2-640, IFC-320, JNCA, JNCA-2 panels, points are detected
automatically when the JWS-3 is connected to the network on which those panels reside.
Therefore, point detection for IFC/IFC2-3030, IFC/IFC2-640, IFC-320, JNCA, JNCA-2
panels requires no user action.
• With IFC-1010/IFC-2020 panels, points are only detected when a user starts automatic point
detection.
• With IFC-300/400 panels, points are only detected when they generate an event, which can
then be seen by the JWS-3; therefore, the only way to add points connected to an IFC-300/400
panel is to manually generate an event for each point.
Events from points that have not been automatically detected will be shown in the Events tab view.
In other words, events coming from a classic panel will be logged even if the points themselves did
not previously appear in the hierarchy list at the left of the JWS-3 screen.
NOTE: IFC-200 points do not get Auto Detected, and they will not be displayed in the hierarchy list on
the left. However, events from an IFC-200 panel and/or point will appear in the Events tab view and can
generate e-mail.
NOTE: Only administrators have security access to the automatic point detection feature.