Johnson Controls JWS-3, Инструкция по установке и эксплуатации

Страница: 21 / 54

Connecting an JWS-3 to a High Speed Network Control Module JWS-3 Embedded Installation
21 JWS-3 Installation and Operation Manual - P/N: 53550:Rev: A1 1/12/10
2.7 Connecting an JWS-3 to a High Speed Network Control
Module
• Use an HS-NCM-W for a twisted pair wire connection.
• Use an HS-NCM-SF for a single mode fiber-optic cable connection.
• Use an HS-NCM-MF for a multimode fiber-optic cable connection.
Connecting the JWS-3 to an HS-NCM-W/SF/MF allows the gateway to communicate with devices
on a high speed NFN network. Connect an JWS-3 to a High Speed Network Control Module using
either of these methods:

USB to USB Cable Connection
Connect USB A on the JWS-3 to USB B on the HS-NCM-W/SF/MF, or connect USB B on the
JWS-3 to USB A on the HS-NCM-W/SF/MF.
Figure 2.9 USB Connection
USB cable
NUP A (J6)
Connect to an
HS-NCM-W/MF/SF