Johnson Controls JWS-3, Инструкция по установке и эксплуатации

Страница: 37 / 54

Administration Tab JWS-3 Operation
37 JWS-3 Installation and Operation Manual - P/N: 53550:Rev: A1 1/12/10
The general appearance of an e-mail notification message, once received, varies depending on the
e-mail application used, individual PC font settings, and other factors. A sample message, however,
can be seen in the following figure.
Figure 4.12 Sample E-mail Message
Send E-Mail
Use the send e-mail page to write and send an e-mail message from JWS-3 in real time.
Figure 4.13 Send Message
To send an e-mail message:
Step 1. Type the recipient’s address in the To: field, or use the drop menu to select from addresses
configured in profiles. (For more information, see “E-mail Profiles” on page 35 ).
Step 2. Type a return address in the From: field.
Step 3. Type a text message in the space provided.
Step 4. Click
Send .
Site Name denotes
where the JWS-3 is
located. The Site
Name is configured
under System
Administration,
System Settings.
Panel Label displays
the name entered into
system for the panel.
Event displays
detailed event
information in the
same format as that
of the panel or
annunciator.
Custom Message was
not defined for this
event type.
Notification message
(software embedded,
can not be edited).