Johnson Controls JWS-3, Инструкция по установке и эксплуатации

Страница: 35 / 54

Administration Tab JWS-3 Operation
35 JWS-3 Installation and Operation Manual - P/N: 53550:Rev: A1 1/12/10
Mail User
This is an SMTP server setting. Leave this field blank unless your network
administrator indicates otherwise.
Figure 4.10 E-mail Configuration
E-mail Profiles
Profiles define the e-mail addresses of the recipients assigned that profile, along with the nodes and
event types that will initiate an e-mail message. Profiles filter e-mail notification by event type. The
six event types are Fire Alarm, Pre-Alarm, Security, Supervisory, Trouble, and Other.
 To Setup E-mail Profiles
1. Click the Administration tab.
2. Click the E-Mail Notification folder.
3. Click the E-mail Profiles subfolder to expand the selection to display the ten profiles.
4. Click the profile to define.
5. Enter the e-mail addresses to be included in the profile for notification.
6. Choose the node (panel type) to be included for e-mail notification.
7. Choose the event types to be included for e-mail notification. Note that these are set on a per-
node basis.
8. Design custom messages.
9. After making all settings for the profile, click
Save to save the e-mail profile.
10. To verify your e-mail profile setup; click Test to send the following message to recipients for
this profile.
The Fire Alarm Web Server at site "NFN Web Server" generated this message in response to an
operator test of e-mail profile #1.
Your e-mail address has been listed in the web server to be notified in the case of an event of
the type listed above.
Please contact your system administrator if you have been inadvertently notified.
NOTE: This is an automatically generated test message; its content cannot be edited.