manualshive.com logo in svg

Johnson Controls FRICK QUANTUM HD, Операция

Поделиться
Скачать
Johnson Controls FRICK QUANTUM HD Скачать руководство пользователя страница 133

QUANTUM™ HD COMPRESSOR CONTROL PANEL

OPERATION

090.040-O (MAR 12)

Page 133

DESCRIPTION: 

The Software Maintenance screen has 

been provided as a way for the user to upload new oper-

ating software to their system, save setpoints or restore 

setpoints.

SOFTWARE SERVICE

Locally Saved Setpoints

Any previously saved setpoint data 

fi

 les will 

be shown here, by the 

fi

 le name that the 

user assigned to the 

fi

 le. The date and time 

stamp will be shown next to the 

fi

 le name.

To delete one or more 

fi

 les, simply click on 

the 

fi

 le name bar, and you will be prompted 

with a warning message that the 

fi

 le will be 

deleted.

Save Setpoints

Setpoint Name

 - Selecting this box will 

call up the keyboard overlay. Use the on-

screen keyboard to enter a custom name 

for the setpoint 

fi

 le that you wish to cre-

ate. When 

fi

 nished, press the

 [Enter] 

key on 

the keyboard. The on-screen keyboard will 

be removed, and you will see your custom 

named 

fi

 le in the Setpoint Name box. You 

will next need to select the location to save 

the setpoint data 

fi

 le to, by selecting 

Save 

Location

.

Save Location 

- Selecting this button will 

cause the following options to be shown:

• Locally

 - Selecting this option will 

save the compressor setup locally 

to the panel.

•  USB Thumb Drive

 - Select this 

button if Uploading from or Down-

loading to a USB thumb drive. In-

stall the drive to one of the two 

USB ports at the lower left corner 

of the Q5 processor board.

NOTE:

 Devices that are formatted using 

any of the following formats have been 

veri

fi

 ed to function properly:

Windows:

• FAT32

• NTFS

• FAT

Linux:

• Linux 

ext2

Although numerous brands and stor-

age sizes of USB thumb drive devices 

have been tested for compatibility with 

the Quantum™ HD system, there is a 

possibility that not all USB thumb drives 

will work.

SERVICE

Software

ACCESSING:

 

Software

Содержание FRICK QUANTUM HD

































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды