www.johnsonandstarley.co.uk
24
Replacement of Parts
6.2 Initial Disassembly
Remove the upper front case that is retained by a
screw in the top of the appliance.
Remove the control fascia by removing the plastic
door, unscrewing the two screws that hold the
control module in place, rotate downward. Unplug
the wires, slide the hinge pins inwards and
remove the fascia from the appliance.
Remove the sealed door by removing the two
screws and easing it to the left to disengage it
from the LH side of internal casing.
6.3 Control Panel (complete)
Because of the complexity and delicate nature of the control PCB, it is supplied as a complete kit with the plastic
facia.
Remove the control panel as descibed at section 6.2.and fit the new assembly in reverse order.
6.4 Electrical Switch
Unscrew the metal cover plate from the rear of the control panel. Unplug the
wires from the switch and remove the switch. Replace with a new component
in reverse order.
Front case retaining screw
Control module fixing screws
