www.joerns.com | [email protected]
Joerns Support Surface
Arise
®
LAL Mattress Replacement,
Arise LAL Overlay, Arise 1000, Arise 1000EX
Joerns Healthcare 1_Art Direction_Joerns Beds_700 Series_UltraCare 8page
5/2007_Page 6 of 8
6
Indications for Use
Note:
The selection of a pressure-relieving
surface needs to be based on each individual
patient’s clinical condition, diagnosis and/or
co-morbidities. The choice and use of a support
surface is one factor in a holistic program of
wound care and treatment.
Pressure Relief
Pressure Ulcers
Rehabilitation
Neurology
Dermatology
Burns
Amputations
Pain Management
AIDS
Arthritis
Oncology
The Arise
®
provides uniform distribution of weight
over a wide surface area, which relieves pressure
against bony prominences and provides a soft,
gentle therapy surface to lie on. For patients
experiencing severe pain and discomfort due
to pressure and/or positioning limitations,
consider the Arise as an adjunct to pain
management interventions.
Note:
Pressure relief and pain management are
conditions and diagnoses for which the Arise may
be indicated. Occasionally, there are orthopedic
and neurological patients that require body
positioning to be maintained in specific alignment.
The Arise has safety features to prevent deflation
of the therapy cells and to keep patients from
bottoming out at all times. The use of the Arise
for these patients should be considered on an
individual basis and discussed with the
attending physician.
Features
The Arise is comprised of two components:
Therapy control unit
Therapy mattress system
Therapy Control Unit Features
True low air loss with up to 100 liters of airflow
per minute
Three modes of operation –
Autofirm, Therapy
and
Pulsate
Pulsating
feature that oscillates the air
throughout the mattress every 30 seconds
Autofirm
mode provides maximum air inflation
designed to assist both patients and caregivers
during patient transfer and treatment.
Patient position sensor optimizes support for
seated occupants (Fowler Boost)
Compact lightweight control unit is quiet, robust
and powerful, with a reusable air filter and
integrated carrying handle for portability.
Crisp, easy to read graphics for intuitive set up
and therapy control
Automatic panel lock out to avoid unwanted or
accidental adjustments
Eight therapeutic comfort control settings
to maximize patient compliance and
promote healing
Closed loop pressure sensor control system
eliminates concerns of changes in mattress
interface pressure due to ambient temperature
and pressure changes.
Integrated swing out hanging brackets for fixing
to most bed frames
Quick disconnect hose feature allows for rapid
attach and CPR deflate at the control unit
Audible and visual alarms for power interruptions
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Electronic Copy: Reference Only