KEEP THIS MANUAL FOR FUTURE NEEDS
Version 1.0
www.qdot-lighting.com
Qdot Lighting Limited
Tel: 0086 20 31105974
Email: [email protected]
Website: www.qdot-lighting.com
Sales Office Location: Room 402, Building B, Taoshang City, Nanxin Dajie,
Qiaonan Road, Panyu District, Guangzhou, China
Zip Code: 511400
Factory Location: 2nd-3rd Floor, No.288, Guangzhu East Line, Pingwen, Lanhe Town,
Nansha District, Guangzhou, China
Zip Code: 511473
Qdot Lighting Limited
QB-1010F
EYEBEAM 1010F
C A U T I O N !
Disconnect from mains before starting maintenance operation.
The following points have to be considered during the inspection:
<1> All screws for installing the devices or parts of the device have to be tightly
and must not be corroded.
<2> There must not be any deformations on the housing, color lenses, fixations and
installation spots (ceiling, suspension, trussing).
<3>Mechanically moved parts must not show any traces of wearing and must not rotate with
unbalances.
<4>The electric power supply cables must not show any damage, material fatigue or sediments.
Further instructions dep
ending on the installation spot and usage have to be adhered by a
skilled installer and any safety problems have to be removed.
In order to make the lights in good condition and extend the life time, we suggest a regular
cleaning to the lights.
<1> Clean the inside and outside lens each week to avoid the weakneness of the lights due
to accumulation of dust.
<2> Clean the fan each week.
<3> A detailed electric check by approved electrical engineer each three month, make sure
that the circuit contacts are in good condition, prevent the poor contact of circuit from
overheating.
We recommend a frequent cleaning of the device. Please use a moist, lint- free cloth.
Never use alcohol or solvents.
There are no serviceable parts inside the device. Please refer to the instructions under
“Installation instructions”.
Should you need any spare parts, please order genuine parts from your local dealer.
connected
10. MAINTENANCE AND CLEANING
