www.joerns.com | [email protected]
Joerns Support Surface
Arise
®
LAL Mattress Replacement,
Arise LAL Overlay, Arise 1000, Arise 1000EX
12
Additional Features
Warning:
A possible fire hazard exists.
This product is suitable for use with oxygen
administering equipment of the nasal, mask, or
half bed-length, tent-type only. To prevent personal
injury or equipment damage, ensure that the
oxygen tent does not extend below the mattress.
CPR
The hose connection at the control unit is marked
CPR
. Disconnect the hose from the control unit.
CPR connection style may vary by model. To
re-inflate the air cells, reattach the hose to the
control unit.
Transport
To transport the patient in bed, turn the control unit
off. Unplug the power cord from the outlet. Do not
disconnect the hose connection at the control unit.
The lower support cell will prevent the patient from
bottoming out for up to 12 hours. Some models
incorporate a foam safety cell.
For the Arise
®
1000 EX mattress, the control unit
can be disconnected from the mattress as the 3"
foam base will continue to support the patient. If
the Bari10A bed frame is to be reduced in width
for transport it may be necessary to deflate the
CairRails. This can be done at the mattress control
panel (Figure 2, pg 10) by turning the lower right
control knob down.
Power Failure
The Arise control unit has an advanced power
failure notification alarm and Comfort Adjust
setting memory capability. Upon power failure
the control unit will flash a red Alarm light on the
keypad and sound an audible signal every two (2)
seconds for up to twenty (20) minutes. The power
interruption feature keeps the current settings in
memory based on the frequency of use and level
of battery charge. The Alarm Reset will turn off
audible and visual alarm.
Power Interruption (Brown out)
In the event of a brief power interruption, up to
twenty (20) minutes, the Arise control unit will
automatically restart and reset to the previous
Comfort Adjust settings. The power interruption
feature keeps the current settings in memory based
on the frequency of use and level of battery charge.
Power Loss
In the event of a power failure in excess of twenty
(20) minutes, the control unit’s stand by light will be
illuminated after power restoration. Press the Power
button and reset the preferred mode and comfort
level as described in the “Operation” section.
Safety cell
In the event of a power failure, the lower support
cells should remain inflated for up to 12 hours as
long as the control unit remains connected. In case
of an extended power failure, transfer the patient to
a hospital mattress or other surface.
CairRails
Integrated CairRails risk management
air bolsters offer a bilateral side bolster solution
designed to address healthcare’s growing concerns
of liability in relation to patient falls and entrapment.
CairRails are being recognized by some of the
nations leading healthcare systems for improving
their patient safety and risk management programs.
CairRails are recommended for patients requiring
additional support during patient care and transfer.
CairRails can help reduce costs while ensuring
optimal clinical outcomes and increasing
patient safety.
Note:
When inflating CairRails, it is recommended
that the control unit be in
Autofirm
mode to achieve
optimal results.
Electronic Copy: Reference Only
