Jntech JNP370LS-V1, Быстрая установка

Страница: 15 / 32

12
array may generate dangerous voltage, cause casualty. The
Non-professionals do not make the connection operation.
Step1:
Please connect the wire of DC connector
according to the following steps:
Operation instruction
Operation
demonstration
1
．
Unscrew the fastening nuts of
MC4
Connector.
2
．
Strip off the DC cable insulation
layer to a length of approx. 7mm.
Insert the exposed end of PV
Cable into the connector tube,
and press tightly with wire
crimpers.
Effect figure. Remember! ! !
Terminals and connectors match
the core, is not reversed.
3
．
Pull the above finished cable
with tube through the fastening
nut.
4
．
Plug it into the wiring slot until a
sound being heard, which
indicating plug into the right
place. Then tighten the nut.
Effect figure