Jntech JNP370LS-V1, Быстрая установка

Страница: 21 / 32

18
Step 1: Putting blue ring tool into
the hole of the MC4 totally, as
shown on the picture.
Step 2: it will be taken apart easily.
5 Commissioning
5.1 Verify before Commissioning
PV Arrays
The PV array should be checked before operating the
inverter, and to ensure that the positive and negative
mustn’t be misconnect, otherwise, the damage may be
caused to the inverter. Make sure that the open-circuit
voltage of photovoltaic array doesn’t exceed the required
voltage.
DC Input
Make sure that the DC terminals of the inverter are
connected correctly and maintained consistent with the PV
array.
AC Output
Make sure inverter AC output terminal is properly
connected and phase sequence is properly connected,
and the protection ground of the system is properly
connected to PE.