28
Note
!
●
Fix the inverter on the rock or panel with the toggle bolt or screw is not
permitted.
●
Supplier would provide the bolt which suitable for th e installation on the
concrete wall.
●
If the inverter is fixed on the wooden wall, please choose suitable bolt to
finish the installation, the bolt length should be enough and p enetrate the
1/2 depth of the walls.
Step 1: Drill holes at selected installation locations according to the size and
shape of the sheet metal installed in the attachment. At least two
horizontal holes and two vertical holes shall be used for drilling. The
horizontal hole spacing is 256mm, and the vertical hole spacing is
165mm. It is recommended that the drilling diameter be 8+1/ -0 and the
depth be 60+5/-0.
256mm
165
mm
Fig. 5-3 Bitmap of the JNPXL mounting hole
