SECTION 1 - SAFETY PRECAUTIONS
1-2
– JLG Lift –
3121773
• An operator must not accept operating responsibili-
ties until adequate training has been given by com-
petent and authorized persons.
• Allow only those authorized and qualified personnel
to operate the machine who have demonstrated
that they understand the safe and proper operation
and maintenance of the unit.
• Read, understand, and obey all DANGERS, WARN-
INGS, CAUTIONS, and operating instructions on the
machine and in this manual.
• Ensure that the machine is to be used in a manner
which is within the scope of its intended application
as determined by JLG.
• All operating personnel must be familiar with the
emergency controls and emergency operation of
the machine as specified in this manual.
• Read, understand, and obey all applicable employer,
local, and governmental regulations as they pertain
to your utilization and application of the machine.
Workplace Inspection
• Precautions to avoid all hazards in the work area
must be taken by the user before and during opera-
tion of the machine.
• Do not operate or raise the platform from a position
on trucks, trailers, railway cars, floating vessels, scaf-
folds or other equipment unless the application is
approved in writing by JLG.
• Before operation, check work area for overhead haz-
ards such as electric lines, bridge cranes, and other
potential overhead obstructions.
• Check operating surfaces for holes, bumps, drop-
offs, obstructions, debris, concealed holes, and other
potential hazards.
• Check the work area for hazardous locations. Do not
operate the machine in hazardous environments
unless approved for that purpose by JLG.
• Ensure that the ground conditions are adequate to
support the maximum outrigger load indicated on
the outrigger load decals located on the machine.
Do not travel on unsupported surfaces.
To
order go
to
Discount-Equipment.com
