SECTION 6 - GENERAL SPECIFICATIONS AND OPERATOR MAINTENANCE
6-20
– JLG Lift –
3121773
Errors Menu
Indicates the agreement (OK) or not (FAULT) status of the
sensors that have a double control.
The sensors are listed on different screens use:
1 - PREV - access the previous input
2 - NEXT - access the successive input
9 - ESC - escape from the INPUT menu
If the OK symbol appears at the side of the sensor it means
that the two elements of the same sensor sent identical
information.
If the FAULT symbol appears at the side of the sensor it
means that the two elements of the same sensor sent incon-
sistent information.
The last page of the error menu describes the error code
relating to the battery charger system, inverter or battery
pack. (See “Lithium-Ion Machine Fault Codes” on page 6-22.)
Errors are indicated by the “spanner” icon in
position 7 on the remote control display (See
“Platform/Remote Control Station Functions”
on page 3-9.).
If there are operating problems with the machine and the
“spanner” icon is shown on the display, do not operate
machine until repaired by a JLG factory trained technician.
R.C. PLATFORM
ON position indicates the remote control is in its mount. (in the
platform).
INCLIN. X
Indicates the inclination of X axis in tenths of a degree.
INCLIN. Y
Indicates the inclination of Y axis in tenths of a degree.
LOAD
Indicates the weight in the platform in pounds.
POS. 1E2
Indicates 1° and 2° arm cylinder stroke in tenths of a millime-
ter.
POS. 3
Indicates 3° arm cylinder stroke in tenths of a millimeter.
ROTATION A
Indicates the angular position of the aerial part in degrees
(180° - aligned photocells).
MOTOR RPM
Indicates the engine speed.
CURRENT A
Indicates the power to proportional valve.
CURRENT B
Indicates the power to proportional valve.
CURRENT C
Indicates the power to proportional valve.
TEMPERAT.
Indicates the temperature measured by the electrical probe.
SUPPLY (V)
Indicate the voltage (In volts).
To
order
go
to
Discount-Equipment.com
