SECTION 1 - SAFETY PRECAUTIONS
1-10
– JLG Lift –
3121773
1.4
TOWING, LIFTING, AND HAULING
• Never allow personnel in platform while towing, lift-
ing, or hauling.
• Ensure boom is in the stowed position and the turn-
table locked prior to towing, lifting or hauling. The
platform must be completely empty of tools.
• When lifting machine, lift only at designated areas of
the machine. Lift the unit with equipment of ade-
quate capacity.
• Refer to the Machine Operation section of this man-
ual for lifting information.
1.5
MAINTENANCE
This sub-section contains general safety precautions which
must be observed during maintenance of this machine.
Additional precautions to be observed during machine
maintenance are inserted at the appropriate points in this
manual and in the Service and Maintenance Manual. It is of
utmost importance that maintenance personnel pay strict
attention to these precautions to avoid possible injury to
personnel or damage to the machine or property. A mainte-
nance program must be established by a qualified person
and must be followed to ensure that the machine is safe.
Maintenance Hazards
• Shut off power to all controls and ensure that all
moving parts are secured from inadvertent motion
prior to performing any adjustments or repairs.
• Never work under an elevated platform until it has
been fully lowered to the full down position, if possi-
ble, or otherwise supported and restrained from
movement with appropriate safety props, blocking,
or overhead supports.
• DO NOT attempt to repair or tighten any hydraulic
hoses or fittings while the machine is powered on or
when the hydraulic system is under pressure.
To
order
go
to
Discount-Equipment.com
