SECTION 5 - EMERGENCY PROCEDURES
5-12
– JLG Lift –
3121773
For left side (operator's perspective) Outrigger and
Track Functions
1.
Locate the proportional flow valve attached to the
group of four valves
(item 6 - Figure 5-3.)
. Press the
enable lever on the valve in until it stops.
2.
The lever on the pump must be set to the right to
manually operate left side outrigger and track
functions.
3.
If operating with NO power, remove the valve stem
cover
(item 1 - Figure 5-3.)
from the flow valve,
depress the button and hold while operating left
side functions
(item 2 - Figure 5-3.)
4.
While also holding the enable lever, activate a
function lever in the desired direction on the
appropriate valve solenoid
(valve description
below),
while pumping the handle to achieve the
desired function movement.
(Item 6 - Figure 5-3.)
•
1st valve, far left - toward front of machine in the
group of four, operates Left Rear Outrigger.
•
2nd valve from the left in the group of four, oper-
ates Left Front Outrigger.
•
3rd valve from the left in the group of four, oper-
ates the Left Track Drive functions.
•
4th valve from the left in the group of four, oper-
ates track extension and retraction.
5.
When finished release the flow valve button and
re-install the flow valve cap
.
6.
Remove manual pump handle from the pump and
secure it in its original position under the ground
control station cover.
7.
Replace any access panels that were previously
removed.
To
order
go
to
Discount-Equipment.com
