SECTION 5 - EMERGENCY PROCEDURES
3121773
– JLG Lift –
5-9
Manual Descent without Engine or Electrical Power.
Using Hand Pump in Hydraulic Compartment on Right
side of Machine
(See Figure 5-3.)
3
4
5
1.
Platform retrieval sequence.
Ensure the machine is level and all outriggers are
properly deployed on a firm surface.
a.
Remove the hydraulic panel cover on the right
front side of the machine.
b.
Locate the pump handle
(item 3)
secured to
the underside
of the Ground Control Box.
c.
Install the pump handle on the pump
(item 4)
and secure in place with the provided screw.
The lever
(item 5)
on the pump must be set to
the left, check decal above pump.
NOTE:
Always swing turntable inline with the chassis first so
that the turntable and base indicator arrows are
aligned. This will eliminate possibility of an elevated or
extended boom being positioned overhead of person-
nel at the pump and eliminate the risk of lowering the
jib onto an outrigger.
NEVER REACH THROUGH, UNDER, OR OVER THE BOOM'S PATH OF TRAVEL TO
THE GROUND CONTROL PANEL. IF NO ASSISTANT IS AVAILABLE, PROCEED
WITH THE FOLLOWING STEPS.
TO AVOID CONTACT BETWEEN JIB AND OUTRIGERS. DO NOT ATTEMPT MAN-
UAL SWING WITH BOOMS AND JIB FULLY LOWERED.
2.
Lift the function enable lever UP and hold
(item 6 -
, While pumping the hand pump
(item
4)
and activating the swing control lever
(item 7 -
in the desired direction of travel, until
the turntable is aligned with the chassis.
To
order
go
to
Discount-Equipment.com
