Special Tab
The
Special Tab
is available when a button is selected. There are two choices available,
None
and
Show / Hide Button Labels
.
Choosing None has the same effect as clicking on the Delete Action button.
If the LCD display is set to an action other than Display Button Labels (see the section titled LCD Display
for more information), pressing a button that has been assigned the Show / Hide Button Labels action will
cause the display to show the button labels. Releasing the button will switch the display back to its
original content. If the button is also latched, then the display will remain in Button Label mode until the
button is pressed a second time.
NOTE: All keysets supplied by JLCooper which use the Show / Hide Buttons Labels action assign it to
Application Button A-8 and/or B-8. In fact, this button has been named “Label” on the MCS5 hardware
and in the main window of the MCS5 software. If you use Show / Hide Buttons Labels in a custom keyset,
it is recommended that you assign it to Application Buttons A-8 and B-8.
If the display is already assigned to show button labels, then there is no need for the Show / Hide Buttons
Labels action, and A-8 and B-8 may used for other purposes.
MCS5 User Manual
36
