The
Inspector
window will be updated to show the window name and coordinates where the click, drag
or move should take place.
From now on, whenever you are in the target application and use the assigned control, it will move the
destination window to the front, then click, move or drag at the selected location.
Once a window name and mouse location has been captured, you have the option of using a partial
window name. This is useful in applications like Final Cut Pro, where the Viewer Window’s title always
starts with the word "Viewer" but the rest of the window title changes depending on what you're editing.
Normally, the MCS5 tries to find a window with the exact name as the window where the click was first
captured, but if the window name has changed, it will fail. You can choose the have the MCS5 just look
for a Final Cut window with the word “Viewer” in its title and it will always find the Viewer Window, even if
the exact name of the Viewer Window changed since the click was captured.
MCS5 User Manual
24
