Immediately below the Label field are editing controls that vary depending on what kind of MCS5 control
is being edited. If the control is a button, you will see a “Latched” checkbox that lets you choose between
a momentary (pressing the button turns it “on”, releasing it turns it “off”) or latched (pressing and releasing
it turns it “on” and pressing and releasing it a second time turns it “off”) behavior.
If the selected control is the Jog Wheel, the
Latched
checkbox will not appear.
Next is a description of the action that is to take place when the selected MCS5 control is pressed or
turned while the target application is active. Below that is the area where this action can be edited. There
are a series of tabs representing the different kinds of actions that can be performed and clicking on one
of these tabs will display controls for editing its kind of action. The available actions are
Built In
,
Keystrokes
,
Mouse
,
MIDI
,
Special
and
Emulation
.
Any changes made in one of these tabs are immediately applied to the selected control. The MCS5
software allows multiple levels of Undo, so you can easily get back to any starting point.
At the bottom of the
Inspector
window is the
Delete Action
button. When pressed it will delete the action
currently assigned to the selected control. This is also undoable.
MCS5 User Manual
16
