Jireh CX0344, Руководство пользователя

Страница: 116 / 189

PAGE 105 of 177
CX0344 Rev 05.3
5.9.1. Slider PPS Encoder
The slider PPS
(probe positioning system)
encoder is used to provide positional
feedback perpendicular to the scan direction of travel. Follow these steps for
installation:
1. Ensure the encoder’s lock screw is loose.
2. Slide the encoder’s dovetail nut onto the frame bar
(Fig. 250)
, continue sliding
the encoder towards the leadscrew until the leadscrew is pressed snuggly
into the encoder’s coupling
(Fig. 251)
.
3. Tighten the encoder’s lock screw
(Fig. 251 - note red highlight)
.
4. Route the encoder cable as required to plug into the 3-axis encoder cable
(Fig. 252)
.
Fig. 250 - Loosen and slide post in place Fig. 251 - Align and mount post
Fig. 252 - Route encoder cable to the 3-axis encoder cable