PAGE
60
of
131
6.
Align the middle of the wedge with the centre of the yoke
(Fig. 122).
7.
Tighten both the probe holder adjustment knob and the arm clamp
screw
(Fig. 123)
while ensuring the wedge remains centred with the
yoke.
5.5.2.2
Probe Holder Vertical Adjustment
1.
Gently lift the heavy duty vertical probe holder and simultaneously
pull the latch
(Fig. 124)
. This action will unlock the probe holder.
Slowly lower the probe holder towards the scan surface
(Fig. 125)
.
Fig. 122
- Align probe with yoke
Fig. 123
- Tighten knob and screw
Fig. 124
- Press up and pull latch
Fig. 125
- Lowered toward scan surface
