PAGE
8
of
131
1.11. Included Tools
The included 3 mm hex driver
(Fig. 1)
is
suitable for most typical adjustments of
the
NAVIC
modules.
Also included in this kit is a 3/8 in wrench
(Fig. 2)
which is used to remove and install
probe holder buttons.
The included 3 mm flat driver
(Fig. 3)
is
useful for releasing the flaps of the raster
arm’s cable tray.
1.11.1. Optional tools
Some specialized adjustments require tools that are not included with this kit.
Fig. 1
- 3 mm hex driver
Fig. 2
- 3/8 in wrench
Fig. 3
- 3 mm flat driver
Fig. 4
- 1.5 mm hex
wrench
Fig. 5
- 2 mm
hex wrench
Fig. 6
- 2.5 mm
hex wrench
Fig. 7
- 3 mm
hex wrench
