PAGE
51
of
131
CX0098 Rev 07.5
4.
Always use the provided caps to protect the connection pivots from dirt,
dust, mud, etc.
NOTE:
When modules are separated. It is imperative the connection pivots remain
free of dirt, sand, mud, etc. If contamination of the pivots occurs, clean the
pivots thoroughly. Once the pivot connections are completely free of debris,
apply a liberal amount of anti-seize compound (e.g. Kopr Kote®) to the
connection pivots of both modules.
5.4. Raster Arm Module
The motorized raster arm adds two axis automated scan capabilities to the
NAVIC
.
The raster arm can carry many different probes for various types of corrosion
scans, including conventional 0° transducers, phased array probes
(e.g. Olympus
HydroFORM™)
and more. The
NAVIC
controller is used to setup all the parameters
of the scan
(see Two Axis Scan Mode on page 30 for additional details).
Fig. 101
- Use cap on connection pivot
Fig. 102
- Use cap on connection pivot
Fig. 103
- Raster arm module
