PAGE
87
of
131
CX0098 Rev 07.5
2.
Affix the probe holders
(with attached wedges)
to the low profile probe
holder frame. On the frame bar, place the secondary probe holders at the
front
(Fig. 212-2)
and the primary probe holders at the rear
(Fig. 212-1).
TIP:
Due to their larger size, scan results are generally improved when pulling
or dragging phased array wedges.
3.
Mount the low profile probe holder frame to the crawler
(see Swivel Mount
on page 48 for additional details).
When mounting the low profile frame,
ensure the attachment knobs
(Fig. 212)
are at the front
(non crawler side)
.
4.
Release the two swivel mount levers
(Fig. 213)
to position the swivel
mount parallel to the scan surface
(Fig. 214)
. When alignment with scan
surface is achieved, lock the crawler swivel mount levers.
Fig. 213
- Align swivel mount with scan surface
A
Fig. 214
- Set rear rotational adjustment knob
