Jenny Science XENAX Xvi 75V8S, Инструкция по эксплуатации

Страница: 5 / 117

5
10.11 Sector I_Force 57
10.12 Program 58
10.12.1 Program commands 59
10.13 I/O Functions 62
10.13.1 Selection of Input Functions 63
10.13.2 Selection Output Functions 65
10.13.3 Operation with Additional Holding Brake 65
10.14 Profile (Velocity) 66
10.15 Captured Pos 67
10.16 State Controller 68
10.16.1 F Setting 71
10.17 Motor 74
10.17.1 Motors LINAX® and ELAX® 74
10.17.2 Motor ROTAX® 75
10.17.3 Third Party Motors 76
10.17.4 Position Overflow 77
10.18 Reference 78
10.18.1 Reference LINAX® 78
10.18.2 Reference ELAX® 78
10.18.3 Reference ROTAX® und Third Party Motors 80
10.18.4 Reference to Mechanical Stop 81
10.18.5 Correction Table for LINAX® / ELAX® 82
10.19 Basic Settings 85
10.20 Version 86
10.21 Update Firmware 87
10.22 Save 88
10.23 Open 88
11 Master / Slave 89
11.1 Master/Slave Configuration 89
11.2 Programming example Pick&Place 90
11.3 Timing Master / Slave 90
12 Gantry Synchronized Mode 91
12.1 Activate Gantry Mode 91
12.2 ASCII Commands for Gantry Synchronized Mode 92
13 Force Process Forceteq® 93
13.1 Overview Forceteq® Functions 93
13.1.1 Force Calibration 94
13.1.2 Force Limitation 94
13.1.3 Force Monitoring 95
13.1.4 Force Control 96
13.2 Integration of Force Processes 97
13.2.1 XENAX® in Program 97
13.2.2 Over Command Set 99