Jenn-Air W11356996, Руководство по обслуживанию

Страница: 44 / 62

COMPONENT ACCESS
4-10
n
JennAir Built-in Coffee System
Removing the Back Panel and Side Panel
1.
Complete the preparation steps 1-10 from “Before
Disassembling the Coffee System” , prior to performing the
following steps.
2. Remove the screw located above the power cord connection
and on the right edge of the back panel.
3.
Remove the screws located on the right edge of the back
panel. Lift up the back panel.
4.
Remove the four screws on each side of coffee system which
are securing the left and right side panels.
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Failure to do so can result in death or
electrical shock.
Replace all parts and panels before operating.